Guide 09 of 20 · Follow in order
Check energy use after a session
Statistics shows kWh for the day and month so you can shorten timers instead of guessing.
You will need
- Airer paired
- At least one heating session
Step 1 of 2
Open Statistics
Heated Airer
Smart Life · as it appears on the phone
Do this
Open Heated Airer and tap Statistics or Electricity at the bottom of the panel (the energy icon).
You should see
Day and Month tabs, kWh used, and a simple bar chart.
Step 2 of 2
Read today, then trim the timer
Day Month
0.62
kWh today · ~6p at 30p/kWh
Current 300W while heating
Smart Life · as it appears on the phone
Do this
Check today’s kWh. The airer draws 300W — about 9p an hour at a typical 30p/kWh rate. If shirts ran three hours, cut the next countdown.
You should see
Today’s total and a current power reading around 300W while heat is on.
Tip. New sessions can show 0.00 kWh for a short time. Check again after the load finishes.